The partner for the professionals of the Industry

Mineral lubricant with stabilised zinc
ISO - L – HM
Cincinnati Milacron (P. 88 - P. 69 and P. 70)

Anti-wear, anti-oxidant, anti-foaming and anti-corrosive properties.
Vickers Denison (HF 0 and HF 2) specifications.

Mineral lubricant with stabilised zinc
ISO - L - HV
IV : 140

Operating conditions under high gradient of temperatures and/or extreme temperatures.

ISO - L - HV
Pour point < - 60°C
Norms : Air 3520 B
OTAN H 250
IV : 400

Circuit or uses that exclude the presence of zinc (silver stages...)

Lubricant without zinc
ISO - L - HM
IV : 100

Fire hazards (mines, iron and steel industry...). Prevention and Safety (public places).

Not easily flammable lubricant of water-glycol type ISO - L - HFC

Fire hazards (mines, iron and steel industry...). Prevention and Safety (public places).

Not easily flammable lubricant of ester organic type. Compatible and miscible to conventional hydraulic lubricants ISO - L - HFDU

Multi-use. Lubrication of slideways, gearboxes and hydraulic drives of machine tools.
Bijur type centralized lubrication.

Mineral anti-wear extreme pressure lubricant.
Contains anti « stick slip » additive

Circulating lubrication,
oil bath or haze.
Not heavily loaded gears.

ISO – L – HH type pure mineral lubricant.

Lubrication of machine tool slideways, columns, cams.

Thick mineral lubricant.
Extreme pressure with strong adhesive properties.
ISO – L – G

Fast movements and high speed of rotation.

Very fluid lubricant
ISO L - FC

Lubrication of pins of tool machines.

Very fluid lubricant. Anti-wear, antioxidant and anticorrosive.
ISO L - FD

Gears and speed reducers, bearings submitted to high loads and violent shocks.

Very extreme pressure mineral lubricant with antiwear, antifoam and anticorrosive properties.
ISO – L – CC

All gear type lubrication (straight spur, bevel, hypoid, worm). Submitted to very severe and difficult conditions (temperature gaps, very high loads, functioning at low or high temperature)

Inhibited polyglycol type synthetic lubricant, miscible to mineral oils.
Reduction of the friction coefficient.
Strong thermal stability.

All gear type lubrication (straight spur, bevel, hypoid, worm). Submitted to very severe and difficult conditions (temperature gaps, very high loads, functioning at low or high temperature)

Inhibited type synthetic lubricant, miscible to mineral oils.
Calories evacuation.
Significant de-aeration and desemulsification speed.

Lubrication of reciprocating compressors.
In case of risk of carbon deposits on valves.
For high temperatures (> 150°C).

Inhibited mineral lubricant. Excellent thermal stability.
High self-ignition temperature.
ISO – L – D
Norms DIN 51506 VDL

Lubrication of screw and sliding vane compressors functioning in medium service conditions.
Important reduction of carbon deposit.

Inhibited mineral lubricant.
Very pure.
Forms a stable lubricating film.
ISO – L – D
Norms : Vickers M 2950 S (35VQ25)
DIN 51506 VDL

For all types of compressors (reciprocating, screw and sliding vane) in severe service conditions.
Low volatility.
Extends oil drain intervals.

Synthetic lubricant with high viscosity index, encourages heat exchange and does not cause any deposit.

When vacuum is required.
Chemical aggression of contaminated vacuum.

Mineral lubricant, highly refined at low vapor pressure..

Refrigerating compressor with ammonia, carbon dioxide, methylene chloride and R 12.

Mineral lubricant of naphtenic character. Low pour point. Good resistance to oxidation.

Air-conditioning system. Refrigerating fluids other than R 12.
Compatibility with refrigerant fluids.

Naphtenic mineral lubricant.
Excellent chemical inertness.
Miscible with cooling agents.

Greasing by pulverization and oil mist of the pneumatic tools (power picks, vibrators).

Mineral lubricant with antioxydant, anti-corrosive and extreme pressure properties. Good protection against humidity.
ISO - L - P.

Desemulsibility properties. Oxidation resistance and protection against corrosion

Mineral lubricant having undergone a special treatment. Resistance to the acidification and fast separation of water.
iso – l – t.

Dielectric properties. High level of breakdown voltage. Weak factor of electric dissipation.

Very fluid mineral oil especially refined to meet the specifications and requirements of class II of standard NFC 27.101 High oxidation resistance.
iso – l – N.

Thermal stability and high flash point. Resistant to the oxidation and anti-corrosive properties.

Mineral fluid for heat transfer by circulation by bain-marie process heating. ISO - L - Q Temperature of use: 200-250°C.

Very high thermal stability. Very weak deposit levels. Excellent thermal conductivity. Temperature of use up to 315°C

Synthetic fluid with very low water content. Recommended for all processes heating using a heat-transfer fluid.

Installation of central heating with production of sanitary hot water. Installation of thermal treatment functioning by simple exchange. Low harmfulness.

ALIGEL Antifreeze concentrated liquid containing monopropyleneglycol. Contains corrosion inhibitors for ferrous and copper metals. Authorized by the Directorate-General of Health (authorization n° 1144 of the 18/09/94).

Tapping, drilling, cutting, and stamping operations. Application on mild steel, stainless steels and combined, aluminium and alloys.

Full oil very EP for drilling, tapping, cutting and stamping of metals. Product without active chlorine.

Protection of metal parts in salty and humid atmospheres. Usable in mechanical engineering industry, plastic injection (moulds protection).

Temporary protection product against rust.

Very high water resistant power, exempted from aromatic or halogenated compounds.

Protection of all not covered metal parts. Resumption of hot galvanized parts. Treatment of aspect/resumption of parts after machining or welding. Preparation of surfaces.

Cold galvanization product rich in very pure zinc for durable protection of all metal parts of ferrous type or alloys. Generates homogeneous films, resistant to temperatures up to 550 °C without degradation. Weldable coating (except under argon) after film generation (24 H with 25°C). The film obtained can be painted. It ensures a galvanic protection against all forms of thermal or chemical corrosion.

Use between - 35 and + 150°C. Resistant to water, vapour, acids and cleaning detergents. Lubrication of bearings charged with conveyors/smooth papers, articulations, chains, movements.

White grease without drop point, F D A, resistant to heat. Grade NLGI 2

USDA H1 lubricant class. Protection against oxidation, corrosion and weariness.

Degreasing of metal parts, bearings, moulds, machined parts. Cleaning of braking components (clamps/discs...) compatible with elastomers.
Cleaning of frames, chassis frames, rails of tool machines. Degreasing of electric motors, disconnecting switches (under tension lower than 12000 v).

Cold safety degreasing agent without hydrocarbon. Does not contain aromatic compound. Inert towards metals, does not cause oxidation on light alloys and copper metals.

Corrosion resistance. Greasing at very high temperatures and very high pressures of slides, gears and taps.

Gelled oil comprising a very high content of molybdenum disulphide. Use temperature between -40°C and + 400°C.

All machine elements. Protection and prevention. Reparation of the equipment in presence of moisture. Very fast penetration.

8 functions auxiliary of maintenance. Rust reducer, releases, removes rust, phosphate, lubricates, hydrophobic, anti-rust, anti-corrosion, anti-humidity.

Long duration lubrication of chains, cams and gears. Product adapted to lubrication in food industry in the case of risk of fortuitous contact with food. Use temperature from – 40 to + 250°C.

Synthesis foaming lubricant for chains. Very strong adherence and damp-proof. Lubricant classified USDA H1.

Application temperature from - 30°C to + 130°C for all bearings and main bearing of marine engines, with electric motors subjected to pressure and moisture.

Multipurpose grease of NLGI 2 rank. Mixed soap of lithium/calcium. Anti-rust properties, water resistant.

Clean lubrication of all mechanisms. Conveying belts, release from the mould of thermoplastics (without serigraphy). Blade of massicot, operation of blowing, screwing, setting of plastic stoppers. Application temperature:
(- 40°C /250°C)

Synthetic anti- sticking lubrication, slip and release agent.

Soak cleaning, by brush, by pulverization.

Pure paraffinic hydrocarbon. Solvent classified USDA H1 Fortuitous contact with food possible. Replaces chlorinated solvents.

Rust-proof protection. Degreasing agent. Damp-proof protection.

Ensure durable protection of covered surfaces. Eliminate traces from greases and impurities by leaving a film of protection. Fight against corrosion in under layers and avoids the formation and the development of punctures.

Avoid the adherence of welding protections. Without smoke nor odor. Is appropriate for all welding methods (except argon) or soudobrasage.

Anti-sticking product for the protection of welding tubes. Does not stain/Protects from thermal oxidation.

Releasing from the mould of plastics materials intended to be treated after moulding (impression, thermo-soldering, electrolytic coating).

Unmoulding without silicone. Up to 200°C temperatures. Do not use on polystyrene and polycarbonates.

Use temperature from - 25°C to + 130°C. For naked gears, cranes, overhead travelling cranes, working under strong loads and/or in water. For chains, cables, pinions, crowns and free air gears.

Drop point free grease from mineral oils. Very strongly extreme pressure.

Applies a thermo contact film to parts to be gone up before assembly. Specific application: protection of welding tubes. Do not vaporize on hot parts.

Anti-corrosive: protective coating on bolts, cables, chains or any external equipment exposed to a corrosive atmosphere (industry, marine). High temperature: assembling and disassembling of the pins, cylinder head joints, screw/nuts. Any element of filter exposed to high temperatures. Disassembling without seizing allowed. Deteriorated threadings: allows metal creep and the correction of the nets.

For general greasing, to use in the presence of food contamination risks or in case of accidental environment pollution risk. Usable under weak loads. Lubricant classified USDA H1

100% vegetable origin and biodegradable oil. Adapted to general lubrication in the food industry (dairies - cheese dairies - bakeries - pastry makings - slaughter-houses, etc...) Release from the mould in the biscuit and confectionery factory. Leisure activities and full air (cycling - VTT - drives out etc)

Application temperature: from - 25°C to 145°C. For temperatures higher than 150°C: Use R CHAINS M (applicable with brush).

Viscous synthesis honey, very slipping by, for greasing of mechanisms subjected to pressure and water washable.

Degreasing and cleaning. Degrease in cold as in hot all metal surfaces. All application methods.

Solvent made up from a complex mixture of hydrocarbons with high solvent capacity and high evaporation speed. Chlorinated, fluorinated and aromatic compounds free.
Flash point: >61°C

Cold degreasing of the strongly clogged machine elements. Following-up of a rinsing operation.

Emulsifiable solvanted preparation with high wettability and detergent power.

Cleaning gel-cream for hands. Soap for workshop.

Scented gel having a bacteriostatic activity while respecting the skin.

Polyvalent, multipurpose degreasing for all cleaning operations in food industry.

Aqueous solution containing tensio-actives and organic solvents. Biodegradable to 90 %. Usable from 50 to 5 % following applications.

Degreasing and cleaning of machine elements in the food industry. All application methods.

High solvent capacity and high evaporation speed. Free from harmful products (according to the user). Guide CNERNA 1992 - USDAH 1 - FDA CFR 172-882 and 172-884

Lubrication of bearings and main bearings working at very high temperatures with low number of revolutions.

Synthetic grease without drop point containing silicones. Grade 2. Use temperature from
- 20 °C to + 295°C

Lubrication of main bearings and bearings working at high temperatures in a strong constraints environment.

Synthetic grease with very high drop point (240°C)
Grade 2. Use temperature from
- 20°C to + 200°C

Lubrication of the bearings, articulations and gears functioning under strong loads and/or at high temperatures.

Bentone EP grease without drop point based on very viscous mineral oils, reinforced with molybdenum disulphide. Grade 2. Use temperature from - 5°C to + 160°C

General greasing in Industry (bearings, gears, main bearings...).

Grease containing soap of lithium and mineral oils with EP Grade 2 additives. Use temperature from - 20°C to + 150°C

Greasing of all parts subjected to very fast movements with risk of centrifugation of grease.

Aluminium complex grease. Drop point
230 °C .
Grade 1. Use temperature from
- 20°C to +180 ° C

All parts subjected to very high revolutions under strong variations in temperatures. Resistance to hot water (DIN 51807)

Synthetic grease with a high degree of purity. Exceptional résistance to oxidation, corrosion and weariness.
Use temperature from - 75°C to + 130°C

Lubrication of the bearings and main bearings in contact with the air and/or wet atmospheres.

Li/Ca grease with water-resistant and anti-rust remarkable properties.
Drop point : 150°C Use temperature from - 30 C° to + 130°C.

Lubrication of bearings and gears, reducers and charged main bearings.

Centralized greasing.

Lithium EP grease reinforced with molybdenum disulphide. Drop point 160°C. Grade from 000 to 3. Use temperature from
- 30° to 140°C according to grade.

Lubrication of very slow movements at very high temperatures. Resistant to seizing.

Paste of assembly containing lead and copper powder.

Use temperature from - 30°C to + 1000° C.